As shown in picture 1, three flashes points, the switch is not on. As shown in picture 2, two flashes points, Switch is energized. Start to programming the.
Press key. LCD screen shall show 2. When finished pragram-setting event , press , Timer shall start to execute programs. If the switch does not open in the set time one day, or opened but not close at the time, it may be because the timing settings are not correct, please check or reset. For those devices medical equipment and large equipment due to time error may occur human life or will have a significant impact on the community, please do not use this time switch.
The product is in a dormant state when you get, before use please press the reset button. After the power is turned on, do not touch the terminal part. The timer can't be used in moisture, corrosion and high metal content gas environment.
For those devices because of timer error may lead to significant property damage large heater and refrigerator, etc. Do not repair by yourself. Repair, inspection, please entrust to the dealer or responsible for the construction of the unit Before installing,please press the yellow spring.
When you confirmed the product be put in a suitable place, press back the yellow spring, products can be fixed. Home Products Time Relay. After setting a group of time, for example, turn on the load at every day Figure 11 , and turn off the load at every day Figure At this time, the group of time will be reset to the initial state, that is, " --" Figure 9 and Figure The timer switch has two switching modes: automatic and manual.
In the automatic mode, the timer switch will be set according to the timing of steps 1 to 3, and the load will be automatically turned on or off at the corresponding time without human intervention. In manual mode, the load must be turned on or off by manual adjustment. At this time, the load will always be in the on state and cannot be turned off automatically.
At this time, the load will always be in the off state and cannot be turned on automatically. At this time, the working state of the load will be switching automatically according to the timing setting, without being interfered by humans.
Note: When the product fails, please disconnect the power first, and then check the equipment! Please refer to the method introduced in "Timing Setting" to delete it. PS: Only when the display shows " --", it means the time group is deleted successful; if it displays "", it means 0 o'clock 24 o'clock , not the deleting success. If it is blown, please replace with a new 0. If the timer switch is burned out, please check whether the power supply voltage exceeds the rated voltage of the product and whether the power cable is connected incorrectly.
Only for timer switch with replaceable batteries 7 Please contact us or local distributor If the fault cannot be eliminated by the above methods, please contact us or the distributor dealer in your local area. If you need to repair and check it, please be sure to entrust a dealership or other authorized unit.
And do not let the timer switch come into contact with oil or water. Step 1. Step 2. Step 3.
0コメント